搜搜做题作业网hwi plc of 4中文意思
来源：学生作业帮 编辑：搜搜做题作业网作业帮 分类：英语作业 时间：2024/04/28 23:14:13
hwi plc of 4中文意思
1.HAI PLC of 3,min中文意思
2.HWI PLCof 4,min中文意思
3.CTI PLC 4,min中文意思
1.HAI PLC of 3,min中文意思
2.HWI PLCof 4,min中文意思
3.CTI PLC 4,min中文意思
.CTI:
Comparative Tracking Index (CTI; ASTM D3638 ) — Expressed as that voltage which causes tracking after 50 drops of 0.1 percent ammonium chloride solution have fallen on the material.The results of testing the nominal 3 mm thickness are considered representative of the material's performance in any thickness.
The above characteristics and dielectric strength,volume resistivity and other electrical and mechanical properties may be determined by means of the applicable ASTM and/or UL specification in ANSI/UL 746A,"Polymeric Materials - Short Term Property Evaluations."
5.HAI:
High- Current Arc Ignition (HAI; ANSI/UL 746A ) — Performance is expressed as the number of arc rupture exposures (standardized as to electrode type and shape and electric circuit) that are necessary to ignite a material when they are applied at a standard rate on the surface of the material.
6.HWI:Hot-Wire Ignition (HWI; ASTM D3874,IEC 60695-2-20 ) — Performance is expressed as the mean number of seconds needed to either ignite standard specimens or to burn through the specimens without ignition.
Comparative Tracking Index (CTI; ASTM D3638 ) — Expressed as that voltage which causes tracking after 50 drops of 0.1 percent ammonium chloride solution have fallen on the material.The results of testing the nominal 3 mm thickness are considered representative of the material's performance in any thickness.
The above characteristics and dielectric strength,volume resistivity and other electrical and mechanical properties may be determined by means of the applicable ASTM and/or UL specification in ANSI/UL 746A,"Polymeric Materials - Short Term Property Evaluations."
5.HAI:
High- Current Arc Ignition (HAI; ANSI/UL 746A ) — Performance is expressed as the number of arc rupture exposures (standardized as to electrode type and shape and electric circuit) that are necessary to ignite a material when they are applied at a standard rate on the surface of the material.
6.HWI:Hot-Wire Ignition (HWI; ASTM D3874,IEC 60695-2-20 ) — Performance is expressed as the mean number of seconds needed to either ignite standard specimens or to burn through the specimens without ignition.